AQUA Drills EX for Heat-Resistant Alloy

AQDEXRN

[ Tool material : Carbide | Surface treatment : AQ coating | Tip angle : 140° ]
・This drill has both wear and chipping resistance for heat resistant alloys that are difficult to handle.
Download

AQUA Drill EX Semi-Long

AQDEXSL

[ Tool material : Carbide | Surface treatment : AQ coating | Tip angle : 135° ]
・This drill provides reliable high performance for drilling deep holes in materials ranging from carbon steels to very hard steels.
Download

Diamond Coated Drills

DCD

[ Tool material : Carbide | Surface treatment : DIA coating | Tip angle : 118° ]
・This drill coated 100% pure diamond is most suitable for long life drilling of aluminum alloy, high silicon aluminum alloy and FRP.
Download

Diamond Coated FF Drills

DFFD

[ Tool material : Carbide | Surface treatment : DIA coating | Tip angle : 140° ]
・This drill coated 100% pure diamond is most suitable for Aluminum. High precision drilling is possible.
Download

DLC Drill Flat Regular

DLCZR

[ Tool material : Carbide | Surface treatment : DLC coating | Tip angle : 180° ]
・High efficiency drilling of Aluminum Alloy is available.
Download

DLC Drill Flat 3-Flutes

DLCDZ3F

[ Tool material : Carbide | Surface treatment : DLC coating | Tip angle : 180° ]
・High efficiency drilling of Aluminum Alloy is available.
Download

Crystal Dia Coated Drills for CFRP

DCDCF

[ Tool material : Carbide | Surface treatment : DIA coating | Tip angle : 90° ]
・Diamond coated drills give great performance for drilling in CFRP.
Download

MQL Power Long Drill

MQLPLD

[ Tool material : Carbide | Surface treatment : AQ coating | Tip angle : 140° ]
・This drill meets non-step drilling of deep holes up to 20 times of a diameter.
Download

PLATINA Oile-Hole Drill 3D

PLOH3D

[ Tool material : Carbide | Surface treatment : TiCN coating | Tip angle : 140° ]
・This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.
Download

PLATINA Oile-Hole Drill 5D

PLOH5D

[ Tool material : Carbide | Surface treatment : TiCN coating | Tip angle : 140° ]
・This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.
Download

PLATINA Oile-Hole Drill 7D

PLOH7D

[ Tool material : Carbide | Surface treatment : TiCN coating | Tip angle : 140° ]
・This oil-hole drill is suitable for most workpiece materials from raw materials to hardened materials.
Download