3-Flute Semi-finishing End Mill for Nonferrous

DHS

[Tool Material：Super Grain Carbide |
Surface Treatment：- | Helix Angle：40° | Number of Flute：]

Surface End Mill for Nonferrous

DSF

[Tool Material：Super Grain Carbide |
Surface Treatment：- | Helix Angle：12° | Number of Flute：1]

2-Flute Long End Mill for Nonferrous

DXL

[Tool Material：Super Grain Carbide |
Surface Treatment：- | Helix Angle：25° | Number of Flute：2]

2-Flute Midium End Mill for Nonferrous

DXM

[Tool Material：Super Grain Carbide |
Surface Treatment：- | Helix Angle：25° | Number of Flute：2]

CHAMPION SOLID 2-Flute End Mill

NC-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
Semi-standard item. Please inquire for price and delivery.

CHAMPION SOLID 4-Flute End Mill

NC-4

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：4]
Semi-standard item. Please inquire for price and delivery.

CHAMPION SOLID 2-Flute Long End Mill

NCL-2

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
Long item. Please inquire for price and delivery.

CHAMPION SOLID 4-Flute Long End Mill

NCL-4

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：4]
Long item. Please inquire for price and delivery.

CHAMPION SOLID 2-Flute Long Shank End Mill

NC-LS-2

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
2-Flute End mill with Extra Long Shank

CHAMPION SOLID 2-Flute Medium End Mill

NCM-2

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
Medium item. Please inquire for price and delivery.

CHAMPION SOLID 4-Flute Medium End Mill

NCM-4

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
Medium item. Please inquire for price and delivery.

POWER SOLID 2-Flute End Mill

NE-2

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：45° | Number of Flute：2]
2-Flute End mill of high helix type.

POWER SOLID 3-Flute End Mill

NE-3

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：45° | Number of Flute：3]
3-Flute End mill of high helix type.

POWER SOLID 4-Flute End Mill

NE-4

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：45° | Number of Flute：4]
4-Flute End mill of high helix type.

POWER SOLID 3-Flute Long End Mill

NEL-3

[Tool Material：Micro Grain Carbide |
Surface Treatment：- | Helix Angle：45° | Number of Flute：3]
3-Flute Long End mill of high helix type.

2-Flute Long Neck End Mill

NHR-2X

[Tool Material：Micro Grain Carbide |
Surface Treatment：X-Coating | Helix Angle：30°/45° | Number of Flute：3]
It is very suitable for cutting on narrow and deep rib by long neck end mill.

Straight End Mill for Reforming

NSL-2

[Tool Material：Super Grain Carbide | Surface Treatment：- | Helix Angle：0° | Number of Flute：2]

KATABUTSU End Mill

NSX-6

[Tool Material：Regular Grain Carbide | Surface Treatment：- | Helix Angle：40° | Number of Flute：6]

2-Flute End Mill

NX-30X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]
The length of cut is double diameter, it is for all-round cutting from roughing to finishing.

2-Flute Ball End Mill for Nonferrous

DB

[Tool Material：Super Micro Grain Carbide | Surface Treatment：- | Helix Angle：25° | Number of Flute：2]

MUGEN-COATING 2-Flute Extra Long Taper Neck Ball End Mill

MRBTN230L

[Tool Material：Micro Grain Carbide | Surface Treatment：MUGEN-Coating | Helix Angle：30° | Number of Flute：2]
It is possible to increase rigidity with the neck taper.

MUGEN-COATING 2-Flute Extra Long Ball End Mill

MSBXL230

[Tool Material：Micro Grain Carbide | Surface Treatment：MUGEN-Coating | Helix Angle：30° | Number of Flute：2]

2-Flute Miniature Ball End Mill

NCB-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]

2-Flute Miniature Ball End Mill

NCB-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]

2-Flute Long Neck Ball End Mill

NHB-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]

2-Flute Ball End Mill

NSB-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]

2-Flute Ball End Mill

NSB-2X

[Tool Material：Super Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]

2-Flute Long Ball End Mill

NSBL-2

[Tool Material：Super Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]

2-Flute Taper End Mill for Nonferrous

DTE

[Tool Material：Super Micro Grain Carbide | Surface Treatment：- | Helix Angle：25° | Number of Flute：2]

2-Flute Long Taper End Mill for Nonferrous

DTEL

[Tool Material：Super Micro Grain Carbide | Surface Treatment：- | Helix Angle：25° | Number of Flute：2]

2-Flute Taper Ball End Mill for Runner

NERB-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]

2-Flute Taper Radius End Mill for Runner

NERR-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]

4-Flute Taper End Mill for Deep Rib

NRF-4

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：-11° | Number of Flute：4]

2-Flute Taper End Mill

NTE-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]
The accuracy of taoer angle (tolerance ±5′)is very stable.

4-Flute Taper End Mill

NTE-4X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：4]
The accuracy of taoer angle (tolerance ±5′)is very stable.

2-Flute Medium Taper End Mill

NTEM-2

[Tool Material：Micro Grain Carbide | Surface Treatment：- | Helix Angle：30° | Number of Flute：2]
It is the taper end mill of the medium type.

2-Flute Medium Taper End Mill

NTEM-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]
It is the taper end mill of the medium type.

2-Flute Taper Radius End Mill

NTER-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：X-Coating | Helix Angle：30° | Number of Flute：2]

2-Flute Inner Radius Cutter for Nonferrous

DIR

[Tool Material：Super Micro Grain Carbide | Surface Treatment：- | Number of Flute：2]

2-Flute Inner Radius Cutter

NCR-2X

[Tool Material：Micro Grain Carbide | Surface Treatment：TiCN | Number of Flute：2]
It is suitable for both processing NC and MC and can be cut at the corner radius easily.